Magnetic Stud Finder with Laser Guide – Wall Stud Locator for Baseboards, Shelves & Picture Frames

Stop knocking on walls. This magnetic stud finder snaps onto the hidden screws inside your drywall, pinpointing the exact center of a wood stud in seconds — no guesswork, no false beeps.

Let the laser draw your line. Once it locks on, a crisp vertical laser beam projects down the wall, guiding every cut, level and mount with total confidence.

Built for real work. A tough heat-resistant shell, simple AAA power and your choice of red or green laser — the tool you’ll reach for on every job.

Why You’ll Love It

• Triple-magnet lock — grabs hidden drywall screws to find the true stud center.
• Laser line guide — projects a crisp vertical beam for marking and leveling.
• Hands-free hold — stays on the wall by itself; both hands free to work.
• Red or green — pick the beam color you see best.
• Job-site tough — HT-PLA body, heat resistant up to 185°F / 85°C.
• Simple power — runs on easy-to-find AAA batteries.

🧲 Triple-Magnet Lock

Three strong magnets grab the screws hidden inside your drywall — the most reliable way to find the exact center of a wood stud. Just slide it along the wall and feel it snap into place.

🙌 Hands-Free Hold

Once the magnets catch, the finder hangs on the wall all by itself. Both hands stay free to mark your line, drive screws or hold the workpiece — no helper needed.

🔴🟢 Red or Green — Your Choice

Pick the beam you see best. Green stays highly visible in bright rooms; red is the timeless classic. Both project the same crisp vertical laser line down the wall.

🛠️ Built for Real Job Sites

Printed in HT-PLA rated up to 185°F / 85°C, the textured body shrugs off job-site knocks and hot work vans. Simple, solid and ready to work — powered by AAA batteries.

Product Details

• Laser color: Red / Green (choose your variant)
• Detection: triple magnets — locates screws in drywall over wood studs
• Laser: vertical line projection, downward
• Power: AAA batteries
• Housing: HT-PLA, heat resistant up to 185°F / 85°C
• Dimensions: 5.1 × 2.2 in (130 × 56 mm)
• In the box: Stud finder × 1, carry case × 1

FAQ

Does it work on all walls?
It is designed for drywall / gypsum walls over wood studs, where it finds the screws holding the board. It does not work on metal studs, concrete or brick.

Red or green — which should I choose?
Both work identically. Green is typically easier to see in bright rooms; red is the classic choice. Pick whichever you prefer.

Does it need calibration or an app?
No. There is nothing to calibrate — the magnets do the finding and the laser does the marking. Just add AAA batteries.

Is the laser safe?
It is a standard low-power positioning laser. Do not stare into the beam or point it at eyes, and keep it away from children.